|
|
|||||||||||||||||
Fisher 630 型 Big Joe™ 調壓器為直接作用式,、彈簧負載減壓型調壓器,，閥體尺寸為 NPS 1 和 2 / DN 25 和 50，可用于 1500 psi/103 bar 的**入口壓力,，并提供 3-500 psi/0.21-34.5 bar 的出口壓力,。 630 型調壓器可用于天然氣、空氣或各種其他氣體應用,，例如**農場**或高壓工業調壓器,。 調壓器可在現場改裝成泄壓閥。廣州奧麗斯特燃?xì)庠O(shè)備有限公司咨詢電話：零貳零-捌貳叁貳玖陸貳伍,，壹叁柒壹零叁陸壹貳陸零/13710361260-陸熙,。
Fisher 630型調壓器功能
可用于高壓應用
經久耐用
更好的低壓控制
可用于酸性氣體
Fisher630型調壓器規格
閥體尺寸和端部連接方式NPS 1 和 2 / DN 25 和 50，
端部連接為 NPT,、ASME CL150 RF,、CL300 RF 或 CL600 RF
**入口壓力 1500 psig / 103 bar
**出口壓力** 500 psig / 34.5 bar
出口壓力范圍3 至 500 psig / 0.21 至 34.5 bar 之間的 10 個范圍
溫度適用范圍丁腈橡膠 (NBR)、尼龍 (PA) 和氯丁橡膠 (CR)：-20 至 180°F / -29 至 82°C,，氟橡膠 (FKM) 和全氟橡膠 (PTFE)：0 至 300°F / -18 至 149°C
單位名稱：廣州奧麗斯特燃?xì)庠O(shè)備有限公司
聯系方式：陸熙020-82329625,，13710361260
郵件地址：[email protected]
單位地址：廣東省廣州市天河區珠村東環路110號珠園大廈402室
Type 630R is a general relief valve available in NPS 1 & 2 / DN 25 & 50 body sizes for compressor stations, refineries and similar plants requiring backpressure gas regulation settings up to 250psi/7,2bar. Available in high & low pressure constructions. Low pressure units have larger diaphragm areas to provide accurate control in low pressure settings. High-pressure units can withstand inlet pressure up to 550psi/37,9bar and can control pressures up to 250 psi/17,2bar.
Features
Tight Shutoff
Easy Maintenance
Ease of Use
Interchangeability
Sour Gas Service Compatibility
Specifications
Body Size and End Connection Styles
NPS 1 and 2? / DN 2**nd 50; NPT, CL150 RF, CL300 RF, or CL600 RF Flanges
Maximum Inlet Pressure
Low-Pressure Construction: 66 psig / 4,6 bar
High-Pressure: 550 psig / 37,9 bar
Max Inlet Pressure Build-up Above Setpoint (Internal Damage)
Low-Pressure Construction: 25 psig / 1,7 bar
High-Pressure Construction: 250 psig / 17,2 bar
Relief Set Pressure Ranges
Low-Pressure Construction: 3 to 50 psig / 0,21 to 3,4 bar
High-Pressure Construction: 30 to 250 psig / 2,1 to 17,2 bar
Pressure Registration
Internal
Temperature Capabilities
Nitrile (NBR), Nylon (PA), and Neoprene (CR): -20° to 180°F / 29° to 82°C
Fluorocarbon (FKM) and Polytetrafluoroethylene (PTFE): 0° to 300°F / -18° to 149°C
Unit name：Guangzhou honest Gas Equipment Co.,Ltd
Contact information：020-82329625，13710361260
Email：[email protected]
Unit address：Room 402,Zhuyuan building,110,East Ring Road,Zhucun,Tianhe District,Guangzhou,Guangdong Province,China
|
