收費島模具基本知識：模具規格一般為長度4米的,，采用3部分主體結構,，所以該模具是一種組合形式

的,，這樣能夠整體現澆的方便性；使用鋼板厚度為面板4毫米,，筋板5毫米,，這樣在重復使用的時候不

會發生變形的現象。收費島的鋼模板數量應該進行合理的規劃,，對于施工的圖紙要進行研究,，確認讓

鋼模具的配置數量更加合理,，確保制作出來的鋼模板是穩固的，這種鋼模板采用的厚度都是在四毫米

以上,，這種比普通模具都要厚的面板要使用在大型的模具上面,，這樣整個施工的過程才會，而且鋼模

板不會出現變形,。

Charge island mold basic knowledge: The mold specification is generally 4 meters in 

length, uses 3 part main body structure, therefore this mold is one kind of combination 

form, thus can the integral cast-in-place convenience; uses the steel plate thickness is 

the panel 4 millimeters, the stiffener plate is 5 mm, so that it will not deform when 

reused. The number of steel formwork on the toll island should be reasonably planned, the 

construction drawings should be studied to ensure that the number of steel formwork is 

more reasonable and the steel formwork produce**ble, the steel formwork used in the 

thickness of more than four millimeters, this than ordinary die is thicker than the face 

plate to be used in the large mol**t the entire construction process will, and the 

steel template will not appear deformation.